Category Side Navigation:
Featured Product
Roadhawk RH-2 driver protection GPS TWIN CCTV in car Camera
Code. RT3RH-2Roadhawk RH-2 digital driver protection CCTV Camera with built in GPS - This product is perfect for CARS,TAXI's, BUSES, LORRIES, in fact any vehicle!
RH-2 Supplied with:
1 x RH-2 TEDR Driver Twin Camera System
1 x Camera Window Bracket (adjustable)
1 x Spare 3M VHB Sticky Pad
1 x RH-2 Suction Mount
1 x RH-2 EMERGENCY Remote Controller
1 x Power Cable (standard accessory plug)
1 x 2gb SDHC Memory Card
1 x User Manual
1 x CD-ROM Software and Manual
1 x SDHC USB Memory Card Reader
RH-2 Supplied with:
1 x RH-2 TEDR Driver Twin Camera System
1 x Camera Window Bracket (adjustable)
1 x Spare 3M VHB Sticky Pad
1 x RH-2 Suction Mount
1 x RH-2 EMERGENCY Remote Controller
1 x Power Cable (standard accessory plug)
1 x 2gb SDHC Memory Card
1 x User Manual
1 x CD-ROM Software and Manual
1 x SDHC USB Memory Card Reader
This is our new RoadHawk RH-2 black box vehicle camera recording system. A box smaller than the average SatNav that sits on your windscreen and constantly loop records video, audio and speed information.
The RH-2 is based on the already very popular RH-1 and uses the same internal electronics, GPS and shock sensors. It is a two channel video recorder so it has both forward facing and inward facing cameras with wide angled lenses giving up to 340° all round surveillance.
The inward facing camera is supplied with a removeable IR light bar to capture clear vivid images even at night making it the ideal choice for public transport or taxis. A wired EMERGENCY remote controller is supplied. When the user pushes the button the RH-2 will store 3 minutes before and 1 minute after the event on the card and not overwrite it.
Built-in G-Force sensors continually monitor for impacts at which point 3 minutes before and 1 minute after are stored on the SD memory card as an event that can later be used as evidence to support a claim.
The RH-2 is supplied with viewing software compatible with all versions of Windows (not MAC). The software reads the encrypted files from the SD card of the RH-2 and pulls data from Google Earth giving a realtime display of the vehcles speed and position.
Another useful function of the RH-2 is the ability to assign a name of the vehicle, driver or the vehicle registration mark to each unit. This then is watermarked into the video making it much easier for large fleets looking to keep track of multiple vehicles.
Time and date is synchronised by GPS and the configuration has been simplified. Its plug and play nature allows it to be installed and in use in less than 5 minutes.
Each system is supplied with a 2gb Card (upgradeable to 16gb) which will hold around 90mins of video and data on a loop. When the card is full the unit starts to erase and overwrite the earliest data. Events such as SHOCK or EMERGENCY button presses will not be overwritten.
A clear and concise manual with pictures to aid installation and operation is included as is a CD-ROM with the operating software and manual in PDF format. The software can be freely distributed and installed on an unlimited number of PC computers.
Warranty:
The RoadHawk RH-2 has a full 2yr warranty included.
The RH-2 is based on the already very popular RH-1 and uses the same internal electronics, GPS and shock sensors. It is a two channel video recorder so it has both forward facing and inward facing cameras with wide angled lenses giving up to 340° all round surveillance.
The inward facing camera is supplied with a removeable IR light bar to capture clear vivid images even at night making it the ideal choice for public transport or taxis. A wired EMERGENCY remote controller is supplied. When the user pushes the button the RH-2 will store 3 minutes before and 1 minute after the event on the card and not overwrite it.
Built-in G-Force sensors continually monitor for impacts at which point 3 minutes before and 1 minute after are stored on the SD memory card as an event that can later be used as evidence to support a claim.
The RH-2 is supplied with viewing software compatible with all versions of Windows (not MAC). The software reads the encrypted files from the SD card of the RH-2 and pulls data from Google Earth giving a realtime display of the vehcles speed and position.
Another useful function of the RH-2 is the ability to assign a name of the vehicle, driver or the vehicle registration mark to each unit. This then is watermarked into the video making it much easier for large fleets looking to keep track of multiple vehicles.
Time and date is synchronised by GPS and the configuration has been simplified. Its plug and play nature allows it to be installed and in use in less than 5 minutes.
Each system is supplied with a 2gb Card (upgradeable to 16gb) which will hold around 90mins of video and data on a loop. When the card is full the unit starts to erase and overwrite the earliest data. Events such as SHOCK or EMERGENCY button presses will not be overwritten.
A clear and concise manual with pictures to aid installation and operation is included as is a CD-ROM with the operating software and manual in PDF format. The software can be freely distributed and installed on an unlimited number of PC computers.
Warranty:
The RoadHawk RH-2 has a full 2yr warranty included.
RH-2 Specification:
Camera 1.3 Mega Pixel CMOS 140deg lens and 170deg lens.
Video Resolution 640 x 480 x 2 @ 19fps
Audio Recording Internal Mic (can be disabled using the software)
GPS Internal GPS module and antenna
G-Sensor Internal 3D G-Sensor (Collision, Q-Break, Q-accel detection)
Data Storage SD Card (min 512mb, max 16GB SDHC)
Power Supply DC 8v - 36v /2w
Camera 1.3 Mega Pixel CMOS 140deg lens and 170deg lens.
Video Resolution 640 x 480 x 2 @ 19fps
Audio Recording Internal Mic (can be disabled using the software)
GPS Internal GPS module and antenna
G-Sensor Internal 3D G-Sensor (Collision, Q-Break, Q-accel detection)
Data Storage SD Card (min 512mb, max 16GB SDHC)
Power Supply DC 8v - 36v /2w
